Nkọwa
Ngwa STM32F730x8 dabere na Arm® Cortex®-M7 32-bit na-arụ ọrụ dị elu.
RISC isi na-arụ ọrụ ruo ugboro 216 MHz.Cortex®-M7 isi nwere otu
Nkenke na-ese n'elu mmiri (SFPU) nke na-akwado Arm® otu-nkenke data nhazi
ntuziaka na ụdị data.Ọ na-emejuputa usoro ntụziaka DSP zuru oke yana ebe nchekwa
Ngalaba nchekwa (MPU) nke na-eme ka nchekwa ngwa ahụ dịkwuo elu.
Ngwa STM32F730x8 na-etinye ihe ncheta agbakwunyere ọsọ ọsọ yana Flash.
ebe nchekwa nke 64 Kbytes, 256 Kbytes nke SRAM (gụnyere 64 Kbytes nke data TCM RAM maka
data dị ezigbo mkpa), 16 Kbytes nke nkuzi TCM RAM (maka usoro oge dị oke egwu),
4 Kbytes nke nkwado ndabere na mpaghara SRAM dị n'ụdị ike kacha dị ala, yana ọtụtụ oke
emelitere I/Os na mpụta ejikọrọ na bọs APB abụọ, ụgbọ ala AHB abụọ, matrix ụgbọ ala multiAHB 32-bit yana njikọ njikọ AXI dị iche iche na-akwado ime na mpụga.
ebe nchekwa ohere.
Ngwa niile na-enye ADC 12-bit atọ, DAC abụọ, RTC dị ala, ihe ngụ oge iri na atọ nke ebumnuche 16-bit gụnyere oge PWM abụọ maka njikwa moto, ebumnuche izugbe abụọ 32-
ihe ngụ oge, ezigbo onye na-emepụta nọmba random (RNG).Ha na-egosipụta ọkọlọtọ na
elu nkwurịta okwu interfaces.
• Ruo I2C atọ
• SPI ise, I2S atọ na ọkara duplex mode.Iji nweta izi ezi klas ọdịyo, I2S
Enwere ike imechi oghere site na PLL ọdịyo dị n'ime raara onwe ya nye ma ọ bụ site na elekere mpụga
ikwe ka mmekọrịta.
• USART anọ gbakwunyere UART anọ
• Ọsọ USB OTG zuru oke yana nnukwu ọsọ USB OTG nwere ikike ọsọ zuru oke (ya na
ULPI ma ọ bụ ya na HS PHY agbakwunyere dabere na nọmba akụkụ)
• Otu CAN
• Oghere ọnụ ọdịyo SAI abụọ
• Oghere ndị ọbịa SDMMC abụọ
Akụkụ dị elu gụnyere oghere SDMMC abụọ, njikwa ebe nchekwa na-agbanwe agbanwe (FMC)
interface, Quad-SPI Flash interface interface.
Ngwa STM32F730x8 na-arụ ọrụ na -40 ruo +105 Celsius C dị nso site na 1.7 ruo
3.6 V ike ọkọnọ.Ntinye ntinye raara onwe ya nye maka USB (OTG_FS na OTG_HS) na nke
SDMMC2 (elekere, iwu na data 4-bit) dị na ngwugwu niile ewezuga
LQFP100 na LQFP64 maka oke ọkọnọ ike nhọrọ.
Voltaji ọkọnọ nwere ike ịdaba na 1.7 V site n'iji onye na-ahụ maka ọkọnọ ike mpụga.A
keukwu set nke ike-azọpụta mode na-enye ohere imewe nke obere ike ngwa.
Ngwa STM32F730x8 na-enye ngwaọrụ na ngwugwu 4 sitere na ntụtụ 64 ruo ntụtụ 176.
Ngwa nke ahọpụtara na-agbanwe ntọala nke akụkụ akụkụ gụnyere.
Nkọwapụta | |
Njirimara | Uru |
Onye nrụpụta: | STMicroelectronics |
Otu ngwaahịa: | ARM Microcontrollers - MCU |
RoHS: | Nkọwa |
Usoro: | STM32F730R8 |
Ụdị nrịgo: | SMD/SMT |
Ngwungwu / Akpa: | LQFP-64 |
Isi: | ARM Cortex M7 |
Nha ebe nchekwa mmemme: | 64kB |
Ogologo ụgbọ ala data: | 32 bit |
Mkpebi ADC: | 3 x 12 bit |
Ugboro elekere kacha elu: | 216 MHz |
Ọnụọgụ nke I/Os: | 50 I/O |
Nha RAM data: | 276 kB |
Voltaji na-arụ ọrụ: | 1.7 V ruo 3.6 V |
Okpomọkụ arụ ọrụ kacha nta: | - 40 C |
Okpomọkụ arụ ọrụ kacha: | + 85 C |
Nkwakọ ngwaahịa: | Tray |
Ngwaahịa: | MCU+FPU |
Ụdị ebe nchekwa mmemme: | Flash |
Akara: | STMicroelectronics |
Ụdị RAM data: | SRAM |
Ụdị ihu: | I2S, SAI, SPI, USB |
Mkpebi DAC: | 12 bit |
Voltaji I/O: | 1.7 V ruo 3.6 V |
Mmiri nwere mmetụta: | Ee |
Ọnụọgụ nke ọwa ADC: | Ọwa 16 |
Ụdị ngwaahịa: | ARM Microcontrollers - MCU |
Ọnụọgụ ngwugwu ụlọ ọrụ: | 960 |
ngalaba: | Microcontrollers - MCU |
Voltaji na-eweta - Nke kachasị: | 3.6 V |
Voltaji Na-eweta - Nkeji: | 1.7 V |
Aha ahia: | STM32 |
Ibu nkeji: | 0,012335 oz |